How do I unlock them?

If your phone is older BB5, then Dejan Kaljevic, a renowned GSM expert, has released software solution. His solution works for the following phones:

* Nokia 6630 RAP3G v2.10E PA
* Nokia 6680 RAP3G v2.0E PA
* Nokia 6681 RAP3G v2.0E PA
* Nokia E60 RAP3G v2.20E PA
* Nokia E65 RAP3G v2.20E PA
* Nokia E70 RAP3G v2.20E PA
* Nokia N70 RAP3G v2.20 PA
* Nokia N71 RAP3G v2.20 PA
* Nokia N90 RAP3G v2.11 PA
* Nokia N91 RAP3G v2.20E PA
* Nokia N93 RAP3GS v2.0E PA


I have one of those phones. How do I unlock it?
You need

* Phone (SIM card removed!)
* CA43 or DKU5 cable (Original Nokia with 13 pins)
* Software (http://users.net.yu/~dejan/download/bb5.zip)

Instructions

1. Connect cable to computer and phone
2. Set proper COM cable (must be, between 1 and 9)
3. Download unlocker, run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg with a text editor set proper COM port (1-9)
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Turn phone on. While it is turning on, click READ PHONE. You should see "DONE"
7. Click MAKE LOG, a log will be created. This log is used to generate the codes. Wait until you see "DONE".
8. Log file is in folder LOGS. Start BB5_calc.exe to make the PSW file.
9. Press button SP UNLOCK and unlock your phone.


It didn't work!

Solution courtesy to_deal_with on gsmhosting.com

* - Phone off,
* - Connect the cable to phone anc pc (dku5, jaf, serial)
* - Open the program
* - Power on the phone
* - When you see Nokia on the screen, immediately press on Read phone!

Afterwards use BB5 Calc and then SP Unlock

This method has always been a success.
If I power on the phone first and let it start up completely, by inserting the cable phone says enhancement not supported and making log fails.

In this case, reconnect the cable and Press Write backup.
If writing backup succeeded, Just follow the method I wrote above. Tested on many N70.

In Dejan's words:
Be sure that my BB5 logger is installed properly with apropriate FBUS interface (DKU-5) or old clasic FBUS cable connected to standard COM port.

Start loger.
Once connected phone by FBUS interface to PC, press "Read Phone" button. If everything is ok, some data will be readed and displayed, otherwise check your connection, phone, cables, etc.

If logger shows message "SP Data IS corrupted" than you have phone that somebody played with it and destroyed field 308,1. So, you have to fix that field by sending that phone to official NOKIA repair centre!!!

If everything is OK you can press "Make Log" button. LOGER will create backup of field 308,1 and try to make LOG file. In that process, sometimes field 308,1 can be corrupted which can be checked by clicking again on "Read Phone" button.

NOW, if logger shows message "SP Data IS corrupted" than you just have to click several times "WR Backup" and "Read Phone" to check that is your phone is OK.

My phone is hardlocked. What can I do?
If you have already used all 3 attempts to unlock via keypad, but you have unlock codes from your carrier, you can use the program to input the codes.

1. In "c:\bb5_unlocker\psw" create a text file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones IMEI
2. Then in that created file enter in "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb" is the unlock codes and where is "c" enter your logs level number (1-7).
3. Save the file
4. Use "SP UNLOCK" function

My phone is a BB5 phone, but not on the list of phones that can be unlocked with Dejan's software. What can I do?
If your phone is locked to Vodafone UK you can try this:
http://www.fonefunshop.co.uk/Unlocking/nokiabb5.htm

Or you will have to wait until the solution is released for free.

Which phones are BB5?

* Nokia 3250
* Nokia 5500
* Nokia 6125
* Nokia 6126
* Nokia 6131
* Nokia 6136
* Nokia 6233
* Nokia 6234
* Nokia 6270
* Nokia 6280
* Nokia 6630
* Nokia 6680
* Nokia 6681
* Nokia 6682
* Nokia 7370
* Nokia N70
* Nokia N71
* Nokia N72
* Nokia N73
* Nokia N80
* Nokia N90
* Nokia N91
* Nokia N92
* Nokia N93
* Nokia E50
* Nokia E60
* Nokia E61
* Nokia E62
* Nokia E70

About "BB5 SP data corrupted"

Be sure that my BB5 logger is installed properly with apropriate FBUS interface
(DKU-5) or old clasic FBUS cable connected to standard COM port.

Start loger.
Once connected phone by FBUS interface to PC, press "Read Phone" button.
If everything is ok, some data will be readed and displayed, otherwise check
your connection, phone, cables, etc.

If logger shows message "SP Data IS corrupted" than you have phone that
somebody played with it and destroyed field 308,1. So, you have to fix
that field by sending that phone to official NOKIA repair centre!!!

If everything is OK you can press "Make Log" button.
LOGER will create backup of field 308,1 and try to make LOG file.
In that proces, some time field 308,1 can be corruted which can be checked
by clicking again on "Read Phone" button.

NOW, if logger shows message "SP Data IS corrupted" than you just have
to click several times "WR Backup" and "Read Phone" to check that is your
phone is OK.

unlock your phone bb5 nokia for free whith data cable dk 5

My instructions:
1. Connect DKU-5 or normal COM cable to computer
2. Set proper COM cable (must be, between 1 and 9)
3. Download unlocker, run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg and write here proper COM port (1-9)
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Click READ PHONE
7. Click MAKE LOG, log will be created
8. Enter codes to phone (in /psw/ dir), or
9. Click SP UNLOCK to enter codes via FBUS
this is the link for download http://users.net.yu/~dejan/download/bb5.zip
if you have have entered in the past 3 times an unworked code your phone is blocked then i have the solution don't worry your bb5 nokia phone 6630 6680 6681 N70 N90 is now lockable for free:


If you got unlock codes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function



this is so simple